Tank & Pipe Fabrication Board is a resin bonded, basalt rock fibrous insulation board product. Tank & Pipe Fabrication Board is specifically designed and manufactured to provide the superior machining characteristics required by producers of bias-cut and faced tank & piped wrap products. Tank & Pipe Fabrication Board provides superior physical integrity during rigorous fabrication processes. Tank & Pipe Fabrication Board may be applied to surfaces operating from -120°F to a maximum of 1,000°F
|
Features
|
Benefits
|
| - Superior thermal conductivity |
- Maximum prevention of heat loss |
| - Wide range of service temperatures |
- Continuous service, -120°F to 1,000°F |
- Low in-service shrinkage;
0% @ 1,050°F (551°C) |
- Less potential for gaps forming at joints
from elevated operating temperatures |
| - Light weight |
- Minimum labour |
| - Minimal fabrication dust |
- Cleaner to handle |
| - Good compressive strength |
- Tough, durable finished product |
| - Non-wicking |
- Negligible water damage |
| - Easy to fabricate |
- Maximize machine time yields |
| Physical Properties |
| Thermal conductivity (ASTM C177) |
"K" Factor BTU in./hr.sqft.°F
|
| 75°F mean |
.25 |
| 100°F mean |
.26 |
| 200°F mean |
.33 |
| 400°F mean |
.52 |
| 600°F mean |
.81 |
|
Service Temperature Range
Nominal Density (per ASTM C-612-83)
Flame Spread (E-84)
Smoke Developed (E-84)
Fuel Contributed (E-84)
Moisture Absorption
Does not promote corrosion of metallic surfaces
Does not promote fungi or bacterial growth
Non-wicking
|
-120°F to 1,000°F
4.0lb./cu. ft.
5
0
0
< 1%
|
Packaging
Standard Package Quantity - Contact Customer Service
Standard Package - Heat-Shrink Poly
Standard Sizes - 2" thickness 24" x 48"
3" or 4" thickness 36" x 48"
Non-standard sizes and packaging available.
Please inquire as to non-standard pricing and availability.
Test Method & Specification Compliance
ASTM C-795-92
ASTM C-612
ASTM C-177
NRC 1.36
Fed. Spec. HH-I-558B
MIL -I-24244B
Notes:
1) Adequate vapour barrier finish must be provided for application to systems operating below ambient temperature.
2) Orders for material requiring certification of testing. ie. NRC 1.34, are to be considered SPECIAL ORDERS and required special pricing.
- Thermal conductivity data given is for TANK & PIPE FABRICATION BOARD. Thermal performance of a bias-sawn tank or pipe insulation will differ substantially
