COREPLUS is a 1200º premolded mineral fiber insulation product designed for mechanical piping systems. COREPLUS 1200º is manufactured to close engineering tolerances to assure predictable performance and ease of installation.
The pipe covering consists of cylindrical sections measuring 3' (91 5mm) in length and are conveniently hinged to form a one piece pipe up to and including 14" O.D. or two piece - half sectional from 14" O.D. through 28" O.D.
A chart is available to illustrate all pipe sizes as well as recommended nesting combinations.
| Features |
Benefits |
| Superior Thermal Conductivity |
Energy conservation, personnel protection |
| Wide range of service temperatures Lightweight, easy to fabricate, and applicator friendly |
Continuous Service (sub-ambient to 1200ºF (649ºC)) |
| Low in-service Shrinkage ( 0% at 1,050º F (551ºC)) |
Butted joints knit well together, thus creating fewer gaps |
| Non-Wicking |
Good watter-shedding properties |
| Less Dusty - User Friendly |
Good handling and application capabilities |
| Good Compressive Strength |
Solid-resilient for banding and jacketing needs |
PRODUCT INFORMATION
| Standard sizes |
1/2" through 24" IPS (13mm to 610mm) |
| Standard thicknesses |
1" through 4" in 1/2" increments (25mm to 102mm in 13mm increments) |
| Service temperatures |
120ºF to 1,200ºF (84ºC to 649ºC); phased heatup not required |
| Linear shrinkage |
0% @ 1,050ºF (551ºC) |
| Moisture adsorption |
<1% after 24 hours in water |
| Wicking Characteristics |
<1% after 24 Hours in water |
| Asbestos |
None |
| Stress Corrosion |
Does not promote or contribute to corrosion |
| Resistance to Fungi |
Does not promote growth |
| Combustibility |
Noncombustible |
| Chemistry |
Chemical analysis available on request |
| Material safety data sheet |
MSDS included in every shipment |
